User Experience/Improving OOo Default Settings
Renaissance Subproject to Achieve Better Default Settings
Executive summary: Please locate your favorite low hanging fruits to improve default settings in all OOo applications. The focus was on lmpress till the end of April. Therefore, the Impress-relevant suggestions in the table below are italicized to show that they are under evaluation already.
"Better Defaults", as this effort is called for short, aims to collect suggestions for better default settings in OOo. Impress was first (in accordance with the present focus of project Renaissance) and the other OOo applications are to follow. This is a subproject of Project Renaissance, so it is listed on the "Current Work" wiki page .
What does "better defaults" mean? Well, I KNOW there are default settings that you change first thing when you install a new version of OOo. So please share what they are and why the change(s) make(s) your life much easier.
For example, two issues Frank found are:
Make objects same size Issue 54281
Text area selection is not very accurate and covers other objects. Issue 96548
One default setting changed recently was Issue 2446 Boy did that feel good! Let's find more of those.
Low Hanging Fruit Clause
No new features. The developer should only have to flip a switch on something that is already alive and kicking in the office suite, but just not set as the default. We want results, so the low hanging fruits are the ones we want to grab.
How to Get Started
Find existing default setting issues or write new RFEs in IssueTracker (use "default" in the title and keyword) and add them to list in the table on this wiki page.
Or, if RFE writing is not your kind of thing, just write your desires to achieve default utopia ;-) in the table below. Be sure to make it clear where the feature is located (write down where to click to get there) and why it is better to set the default the way you want it as compared to the old setting.
If you have a complex issue or several defaults in the same area, it would be best if you create an individual wiki page (put link to it in the table below) for all the related defaults like Chris did (see Grid Handling.) Each individual default setting being suggested can then be discussed on the respective wiki pages, just like the discussion in the table at the bottom of the Grind Handling wiki page. That information will serve as the basis for decision making when it comes to evaluation time, because the iTeam will have the discussion and details all in one place (wiki page) and not jumbled all over the mailing lists.
The iTeam will evaluate the suggestions and decide what to implement with the resources they have within the scope of the Renaissance project.
List of Better Default Setting Suggestions
|Rotation Mode, Guides when Moving on||Impress||'Rotation Mode after Clicking Object' & 'Guides When Moving' are two feature options which are switched off by default => they should be switched on by default (more info: Grid Handling).||Clu|
|Change Handle Size||Draw/Impress||The current handle size was defined years ago - with displays offering less density than today. I propose to change the default handle size to "large". This option can be found in the toolbar "Options" (more info: Grid Handling).|| ChristophNoack|
|bullet point lists||Impress (1)|| Bad standard defaults of bullet point lists. If one creates a text frame in Impress and clicks on the button "numbering and bullet points" (Nummerierung und Aufzählungszeichen), the newly created bullet point list has terrible standard defaults:
|default colour of drawing objects||Draw/Impress||The default color of drawing object is ugly and has not changed since the 1990ies. For more details, see Issue 93507||Gerald|
|'Right page' should be next style to 'Left page'||Writer||Issue 15498||Name|
|Ugly style sheets for headings in Writer||Writer||I used Writer for several articles, publications, flyers and in all of them the standard headings look ugly and outdated. Any designer would not choose these style sheets for Heading 1-10. Furthermore, in this regard the competition has made large steps forward during the last release cycles.||Gerald|
|Make manual page break in Writer better visiable||Writer||for example use 'light blue' and a thicker line. Issue 33518 and duplicates Issue 65150 , Issue 82353 , Issue 96963 , Issue 22646||Name|
|Default line too thick||Chart||especially XY-Charts need hairline lines.Issue 98803||Name|
|provide hidden toolbars like 'circles and ovals'||Draw||Include toolboxes circles, rectangles, text instead of single symbol in drawing toolbar. Reasoning: (1) The 'circles and ovals' and the 'text' toolbox is not accessible via View - Toolbars in Draw. So currently the only way to access arcs and legends is to customize the drawing toolbar. (2) Draw is used for technical constructions and there those objects are often used, in contrast to Writer or Impress, where drawing objects are used for illustrations in most cases. (3) Using the toolboxes needs no more space than single objects and give you a quick access too, because the last used object remains above for single click.||Regina|
|Add Math formula icon to standard bar||All||Math objects are often used in technical documents. You need the way Insert - Object - Formula to insert one. That is too long. For example consider writing a math text for school, which has about twenty formulas per page usually.||Regina|
|Distance in numbering styles larger||Writer||Make the distance from number to text in numbering styles larger, so that 10. text is still in line.||Regina|
|Add a gap in table of contents||Writer||Add a gap (tab or space) between number and text in table of contents in Writer. The picture shows the ugly default settings. Notice the missing space between number and heading text.||Regina|
|Use parallel perspective for 3D-scene||Draw||3D-scenes in Draw are to illustrate constructions. Often several 3D-objects are combined in one scene. Working with several objects is faulty if perspective is on. So the first step when working with 3D-objects is to switch to parallel projection. It is "faulty" because it is unhandy to arrange or rotate objects inside a scene when in central perspective and because of Issue 67847 .||Regina|
|Set margins in style of Math formula objects to 0cm||Writer||Set margins in style of Math formula objects in Writer to 0cm. Issue 22136||Regina|
|Add a spacing below for tables||Writer||Add a spacing below for tables in Writer. In normal text flow the style text body is used, which gives good distance between two paragraphs. It has a spacing above of 0cm and a spacing below of 0.21cm. But after a table the text nearly touches the border of the table, because the table has spacing 0cm. And if you do not use borders the spacing is to small too, because the style Table contents has below spacing 0cm too.||Regina|
|Uncheck transparency warning||All||Uncheck transparency warning in Tools > Options. Modern PCs are fast enough to calculate transparency. So most oft the users no longer need this warning.||Regina|
|change default color in form wizard||Database||the default background color of an default form document, created by the form wizard, is anything like orang -> this is a bad default and looks unprofessional => change it in anything common like 'light gray'||MSC|
|switch off impress wizard||Impress||looks old fashioned, is redundant and annoying||WG|
|Default Clipboard Format for vector graphics||All except Draw||If someone paste a vector graphic into a document, he normally doesn't intend to edit it there, but most probably he needs to resize it. Unfortunately scaling of embedded Draw graphics doesn't work, because text will not scaled proper. Until this work, the user must use Paste Special->As GDI-Metafile. I think GDI-Metafile should be the default here.||Jörg|
|Changing default font||Impress & Draw|| Issue 70585 It should be possible to change the overall default font for text (not the GUI)
in Impress permanently, using one centralized setting, for example Options -> Openoffice.org -> fonts -> Change default font or somewhere similar.
|Change default pen color from neon green||Impress|| Issue 47990 As described in BUG 10922 the neon green color of the pen used to draw on a
presentation is very difficult to see for students in a classroom, and the color is hard coded into OOo. I would like to see the default changed to perhaps black or red, as they are much easier colors to see. BUG 10922 is still a very good idea, but I filed this report to request a simple change of the default color, which should be much easier than what BUG 10922 is requesting. A slightly more ambitious, but still not difficult, would be to read the color value from a file or some such, instead of hard coding it in the OOo source.
|Options for line width of the pen (in slideshow mode)||Impress|| The pen in the slideshow mode has a very small line width. Therefor it is not visible for all partipants of a presentation. If something should be market the pen had to be much wider.
The pen is available after you set in menue: slide show / slide show settings & check 'mouse pointer as pen' & starting a presentation.
There is already a patch for the pen integrated into the go-oo-build, that gives the posibility to change the configuration of the pen (color, line width etc.).Please integrate this patch into vanilla-ooo.
|change configuration of the pen during slideshow mode||Impress||It should be posible to change the configuration of the cursor (from arrow to pen) during the presentation mode (via context menu). There is already a patch for the pen available, that is integrated into the go-oo-build. It gives the posibility to change the configuration of the pen. I don't know yet, if it makes the options dialog also available during the presentation mode. Please integrate this patch into vanilla-ooo.||andreasma|
|Don't emulate MS Office's annoying "clippy"||All||Options | OpenOffice | General and then Turn off Help Agent and Turn on Extended Tips||Safway|
|Please set all checkboxes in Change Tools --> Options --> Load/Save --> Microsoft Office by default||All||It is very annoying that these checkboxes are not checked by default because users which own Microsoft Office and open a document with an Excel OLE-object see a document in a different way than a user who does not have Microsoft Office installed. This is because (by default) an installed Excel is used to render the xls-diagrams while (when Excel is not installed) OpenOffice.org is used to render it. When a user sends such a document to a different user it seems as if OpenOffice.org does not display the document in the same way as on the other computer. But the problem is in the OLE-object. When the boxes are checked it would be a better default.||parity|
|Tab Stops with reasonable settings||All||Tools > Options > Writer or Writer/Web or Calc or Impress or Draw > General > Settings > Tab stops = 0.50 instead of 0.49||Safway|
|Grid Settings much more manageable and understandable||All|| Tools > Options > Writer or Writer/Web or Calc or Impress or Draw > Grid
Snap to Grid should be off. Visible Grid should be off. Resolution > Horizontal = 0.10 instead of 0.39. Resolution > Vertical = 0.10 instead of 0.39. Synchronize axes should be on.
|Table keyboard handling consistent||Calc||Tools > Options > Calc > Table > Keyboard handling > Insert cell > Column = 0.20 like the others instead of 0.98.||Safway|
|Anchor context sensitive toolbars by default||All|| Context sensitive toolbars (like table, image toolbars) is a great feature
when you get used to it, but new users just see a toolbar popping in front of their work. I always dock those toolbars to the bottom edge of the window. I think this could be a good default for new (and old) users.
|Change "Show as tip" for word completion||Writer|| The word completion is a useful feature, but the way it is shown by default is quite "disturbing": if a
long suggestion pops when you are near the page edge the word you are writing will jump to next line. "Show as tooltip is a better alternative, IMO. The option is on Tools -> AutoCorrect Options -> Word Completion tab
|Space Markers Off||Writer||Turn off markers for spaces (small dots between words).||mr_smyle|
|Shortcut For Insert Comment||Calc, Writer||Like Ctrl+Ins or Shift+Ins||mr_smyle|
|Text Paragraph Indents||Writer(RU)||For style 'Text Body' in RU Locale. Off top margin. Add first line indent 1cm. On justify.||mr_smyle|
|Many Issues From helen_russian||All||Look at this page, please: http://translate.google.com/translate?js=y&prev=_t&hl=en&ie=UTF-8&layout=1&eotf=1&u=http%3A%2F%2Fmyooo.ru%2Fcontent%2Fview%2F58%2F1%2F&sl=ru&tl=en -- Discussion was here at 5:05:35 PM||mr_smyle|
|Show Color Panel||Impress||View -> Toolbars -> Color Bar||mr_smyle|
|Please include presenter screen in default install set of OOo.||Impress||Only this integration in the default install set would make the presenter console usable for many use cases: See more detailed description in Issue 90415 .||Gerald|
|Remove the limits on multi-level undo!||All||I assume that this limit is just an out-dated, but hard coded default setting. Please see: Issue 98009||Gerald|
|Styles and formatting panel docked right||Writer||Styles and formatting panel is floating and that's annoying, partialy because it obstructs sight from file in edition.It should be in right side (or left) docked so it's always in the same place, and doesn't obstruct the documents.||xihh|
|Find & Replace after selecting a range should have "current selection only" checked by default||Calc|| If you select a range of cells before a Find & Replace, it means in 90% cases that you want to act inside this selection. So the option "current selection only" (two clicks more today) should be:
- pre-checked if there is an active cells range selection - unchecked if there is no active cells range selection
|Gilles Bignebat (gibi)|
|All OpenOffice.org programmes should use the same default keyboard short-cut for inserting comments||Impress,Calc,Writer||Inserting comments in OOo programmes is inconsistent. 1st: since the name has changed from "notes" to "comments", the keyboard short-cut in Writer is still Ctrl-Alt-N, but should be Ctrl-Alt-C now. 2nd: None of these short-cuts works in Impress or Calc. Why?||Gerald|
|Default Impress formula font should be much larger||Impress||The default font size for formula in Impress (after Insert->Objects->Formula) is 12pt which is too small to read on the screen. It should be 16pt or 18pt. Please see: Issue 21118 .||Gerald|
|Add default keyboard short-cut for inserting new slide||Impress||Please see: Issue 100650 .||Gerald|
|Remove old word versions from Save As dialog||Writer||Take a look at Issue 21118 , Word 95 and 6.0 formats aren't being used much anymore, I have had several users accidentally click on them and lose data from the format change. Since they are at least 15 years old and the number of people using Word 95 and 6.0 are likely a very small number I suggest we disable it by default. (It might be possible to move it over to Export?)||gquigs|
|Remove old staroffice files from Save As dialog||Impress, Writer, Calc||Similar to above, but I haven't had users do it accidentally yet. It would also go a long way to make the save as-> file format dropdown less overwhelming to users. (It might be possible to move it over to Export?)||gquigs|
|Enable Vertical Text Button for all||Impress, Draw||It was disabled apparently on purpose but it makes the interface inconsistent. Also, in many presentations people try to use vertical text and can't find it (I have been asked by my users about this on many occasions). Alternative solution (which seems odd to get this functionality) is to enable "enhanced support for asian languages" by default. Read more Issue 54423||gquigs|
|Enable Vertical Align Buttons||Calc||I always enable toolbar buttons for vertical align text in the cells. MT: +1||mr_smyle|
|Enable Add Comment Button||Writer||I always enable toolbar button for adding comment in writer||mr_smyle|
|Attach Numeric Styles to same Paragraph Styles||Writer||At now default paragraph styles 'Numeric paragraph N' 'Marked paragraph N' have not same numeric styles. So, activation of NUMERIC style did not activate numeration of paragraph! It`s very unexpected for trivial user.||dvc|
|Use ??/?? as default for fractions instead of ?/?||Calc||See Issue 67862||fst|
|New Document Property : PrintIntention||ALL|| All users who wish to create documents who has to been "printed" by a professional Printer (high resolution) struggles with the same problem:
The size/resolution off the graphics inside a OOdocument.
I propose to store a "Printer Intention" in the Document
see also http://api.openoffice.org/servlets/ReadMsg?listName=dev&msgNo=22239
|Default user annimation||Impress|| Issue 62838 I want to create a user animation with default behaviour: The object just pops up with no tricky animation. Therefore I have to search for this "animation" type (called in german: "erscheinen") every time within the large list of possible animations. This costs me a lot of time. It would be better, when this were the default, and only if I really want fancy animation, then I have to choose from the list.
clu: idea .. usage tracking can show if one setting is significantly more often shown than other .. and this one can became the new default
|Duration of pause to 0||Impress||Issue 49762 In Slide Show settings (Slide Show - Slide Show Settings), Impress features a setting for the "duration of pause before the slide show is repeated". It defaults to 10 seconds. I would suggest to have the default set to 0 seconds in order to improve compatibility with MS Powerpoint users, and secondly to leave the decision to insert a pause to the user.||Clu|
|Slide Titles editable in navigator||Impress||Issue 21888 The Navigator is a very handy tool to move through a presentation and it also can act as a mini outline of the presentation. However, now the only way to change the slide title shown is to display the Modify Layout dialog from the Format menu. It would be a very nice addition to allow the user to directly edit the title of the slide shown in the Navigator directly in the Navigator.||Clu|
|Real Slide Titles in Navigator||Impress||Issue 21888 It would also be very useful to display the title actually shown on the slide itself as the title unless the user deliberately changed it. The current "Slide 1", "Slide 2", etc. defaults are not very useful for identifying the slide.||Clu|
|Change default table color||Impress||Issue 102922 After inserting a table I change the color of my table. I added the data. Now if I want to add a new row, then despite the color of my whole table it inserts the row with default color (blue combination). So I need to select that row again & then change the color. Steps to reproduce the bug:||Clu|
|Shortcut for adding a new slide||Impress||Issue 100650||Clu|
|Open pps files in show mode||Impress|| Issue 52755 If, during installation, a user choses to associate Microsoft PowerPoint
documents with Open Office, the default behavior for a .pps (PowerPoint Show) file is changed to this:
"C:\Program Files\OpenOffice.org 1.9.109\program\soffice.exe" -o "%1"
This causes the presentation to be opened in edit mode when double clicked. However, when using Microsoft PowerPoint as the default handler, double clicking a .pps file causes it to immediately start the show. To achieve the same behavior, and hence ease the migration from MSO to OOo, I believe the default behavior for .pps files should be as follow durring installation:
"C:\Program Files\OpenOffice.org 1.9.109\program\soffice.exe" -show "%1"
|Disable "Allow quick editing" mode as default||Draw/Impress||The so called quick editing mode at /tools/options/draw/general or /tools/options/impress/general should be disabled by default because people will be able to detect and to move text objects more easily||ja|
|"Number recognition" (in tables) should be turned of by default,||Writer||It's usefull for advanced user, but disorientating / annoying for new users. Advanced user can easily switch it on.||CamilleM|
|Default shadow should be transparent and smaller||Impress||A better shadow effect can be achieved with Distance : 0,1 cm (instead of 0,3) ; Color : Black (instead of Grey) ; Transparency : 60 % (instead of 0%)||CamilleM|
|"tagged PDF" as default||All||PDF-Export: set "tagged PDF" as default (30% bigger files, but accessible by default) .. from letter of MT||Clu|
|"don't register" as default||All||First-Start-Wizard: "don't register" as default .. from letter of MT||Clu|
|Improvement Program in startup wizard||All||Move the question about participating in the improvement wizard to the first run wizard. (Alternatively put them both as part of the install)||gquigs|
|Don't put OO install files on Desktop||All||It makes OO look messy when it has to extract the files to the desktop first. Removing the extra extraction step would be the best, but if not, extracting to a temporary location, and then deleting when done.||gquigs|
|Keyboard shortcut to make fine position adjustments||Draw, Impress||I often use the alt+arrow keys to make fine adjustments to the position of drawing objects in Draw and Impress. In Mac OS X, that shortcut is assigned to switch 'Spaces' (the multiple desktops in Mac OS X). Please see Issue 107125||vkkodali|
|Double-click to bring up 'Position and Size' dialog box||All||Currently, the easiest way (AFAIK) to reach the 'Position and Size' dialog box for a drawing or text box object is from the right-click context menu. It would be nice to activate it upon double-clicking on the object ala MS Office. Currently, double-clicking the object brings up a cursor to allow text entry.||vkkodali|
|Increase default size of graphics cache||All||Many users know nothing about the size of the pictures they insert in their documents and they encounter performance problems often due to the too small size of graphics cache. Please see Issue 63253||jbfaure|
|Change print default to 'All Sheets'||Calc||In the file/print dialog the default setting is 'Selected sheets', but should be 'All sheets' and this can confuse normal user because 1. the user await that the whole doc is printed if he push the print button; not from selected sheet on (that can give a lot of confusion) 2. the preview can show a different numbering and amount of pages than the print outcome 3. the user do not await this behavior if he does not made further settings and this is an inconsistent behavior to f.e. writer which print all pages by default (from cj).||Clu|
|Make the "record changes" feature more attractive||Writer||The "record changes" feature is not easy to find. Two suggestions: 1. Rename the toolbar from "Changes" to "Record changes". 2. Add icons to the toolbar buttons to make them more visually appealing.||paperjam|
|Adapt the "update extensions" dialog to make it look like the "extensions manager" dialog.||All||The "update extensions" dialog should use the same layout that the "extensions manager" dialog uses.||paperjam|
|No Splash Screen||All||Disable the splash screen by default, 3.2 is fast enough starting. it just feels like it is getting in the way.||gquigs|
|Disable OpenOffice's Open/Save Dialogs||All||At least on Ubuntu Linux the non OpenOffice dialogs are much much easier to use and more consistent with the platform. You can try for yourself in options -> General -> Open/Save||gquigs|
|Autotext default preview window too small||Writer||The default preview window of the Autotext dialogue is too small. It is almost impossible to read the available autotexts in that window.||Gerald|
|Do not close Toolbar dialog automatically||All||In View-Toolbar we can see a dialog to select the toolbars we want to be visible. Many times we are looking for a set of functions we do not know exactly in which toolbar they are implemented. So we select on toolbar and the dialog closes. We check the functions are not there, select View-Toolbar again, deselect the previous toolbar - and the dialog closes. Select again View-Toolbar, select another toolbar, and the dialog closes. You can now see what I mean. If the default is to keep the dialog open until we are satisfied that all the needed toolbars are selected we could save time and avoid frustration||pvilela|
|remove 'Display Grid' icon from 'Standard' toolbar||Impress||delete 'Display Grid' icon from 'Standard' toolbar -> it is only 0.02% clicked (one of the fewest) and also available over menue||Clu|
|"Save as" should always offer ODF as default file format||All||If a Word-,Powerpoint-,Excel-file is opened in OpenOffice.org and one selects "File"->"Save as", the default file formats should be .odt/odp/ods instead of .doc/.ppt/.xls.||Gerald|
|Some default settings in toolbar drawing/zeichnen are confusing||Impress||Some default settings in toolbar drawing/Zeichnen are not chosen well: (1) The default for standard forms/Standardformen is a rectangle, which already has another default entry in the drawing toolbar with the name "rectangle"/Rechteck. It would make more sense to choose in "standard forms" another default setting such as "rounded rectangle" or something else. (2) The tool tip for insert image/Bild einfügen is "Aus Datei", which is much worse than "Bild einfügen", so why? (3) Why is the icon/selection "lines and arrows/Linien und Pfeile" hidden by default in the drawing toolbar? It would make sense to add it to the toolbar by default or to replace the icon "Linie mit Pfeilende/line with arrowhead" with the selection "Linien und Pfeile" (which also includes the "Linie mit Pfeilende"). (4) Why is there an entire independent toolbar called "Kreise und Ovale/Circles and ovals"? These elements should be by default in the drawing toolbar and not separated.||Gerald|
|pdf-export with comments should only export commented slides||Impress||In the pdf-export options in Impress it is possible to export comments but the problem is that this options leads to an exports which contains all slides without comments followed by all slides with comments. This is not what the normal user expects. Please change this option so that only the commented slides are exported.||parity|
|Initialize the writer||Writer|| I always set the following in Writer, if they are not set already:
set the measurement units to metric set tab stops to 1.5cm
set the firstline indent for indented paragraphs to 0.75cm
set for headings 1-4 the before text indent to 0.75cm and the firstline text indent to -0.75cm
set for all styles I use the above paragraph and below paragraph spacing to be rounded to then nearest mm. e.g. 0.2, 0.3 instead of 0.21
turn off (this most annoying) autocorrect for two initial capitals
capitalize first letter URL recognition custom quotes
set autocomplete accept to TAB, not return! everything else in the world uses tab for autocomplete.
(from a letter of st)
|Properties on context||Impress||I make changes to the drawings/text box objects that I make in impress almost all the time. Currently, apart from the easily accessible options that appear as buttons on the toolbar, the way to do this is to right-click on the object, go to the 'Properties' dialog box and change them. In MS Office this 'Properties' window can be accessed by double-clicking on the object. OOo default for double-clicking, say, a filled rectangle is to bring up a cursor to enter text. It would be nice to have the 'Properties' window appear like in MS Office unless there is a compelling reason for the current behavior. (from a blog comment of vamsi)||Clu|
|Border/Backgroundcolor button on toolbar is not 'sticky' on Calc||Calc||please consider also issue 10864 (from a blog comment of tommy)||Clu|
|empty bullets should not be shown in presentation||Impress||like it is at ms office (from fl)||Clu|
|serial effect for set of bullet points||Impress||if you have a set of bullet points and you want the single points to f.e. 'fly in' you should have the possibility to take the whole box and give it the effect that they serial fly in .. (from fl)||Clu|
|Last accessed element in sidebar/Aufgabenbereich should be default for sidebar of next slide||Impress||The active element in the sidebar/Aufgabenbereich always jumps back to the default element "Layout" and not to the last accessed element, e.g. "Slide transitions/Folienübergang". This can be extremely annoying. For example: If I want to edit the "custom transitions" on several slides, always after switching to another slide, the sidebar "forgets" that I was working on "custom transitions" and goes back to the default "Layout". Always the last accessed element should stay the active element, if one switches to another slide.||Gerald|
|Change rotate button in mode on/off||Impress||if you push the rotate button the rotate mode is on .. if you push again i awaint to switch the mode off but that does not happen .. you must click anywhere and on the shape again to switch back to the 'normal' selecting mode||Clu|
|misc autocorrects||Writer||turn off (this most annoying) autocorrect for - two initial capitals - capitalize first letter - URL recognition - custom quotes - set autocomplete accept to TAB, not return! (from blog comment of Marcello Romani)||Clu|
|space key to shift slide||Impress||in zoom toolbar you have an icon called shift for this job, but a keyboard shortcut is missing .. photoshop and other graphical apps use the space key for that which seems to be a good solution (fl)||Clu|
|Add a button "Save Template"||Impress||automatically recognize a new template not on file, perhaps, or just notice that a template is open and offer the button (from a chat I had with a sales guy)||Liz|
|provide presentation manager in separate window in one computer/monitor||Impress||Provide this as a possibility without the need for a second monitor, so that presenters can practice a presentation as if they were in the real situation, but only need one computer/laptop to practice on (from a chat I had with a sales guy)||Liz|
|when inserting in Impress, automatically open a text box||Impress||the default would be a text box just appears when Paste is chosen---is it possible to identify what is on the clipboard to be pasted? i.e., if text, then text box opens (from a chat I had with a sales guy)||Liz|
|show links with the “short text” instead of the path||Impress||(from a chat I had with a sales guy)||Liz|
|Text in slide show should automatically adjust to the vertical middle of slide||Impress||to make it look professional without the user having to fiddle with it (from a chat I had with Rosana)||Liz|
|Add more page layouts||Impress||I have drawings of 3 example layouts (from a chat I had with Rosana)||Liz|
|switch task pane off||Impress||at the moment the task pane is on by default .. with the new changes in design it makes rather no sense to keep this default (fl)||Clu|
|Zoom fit to width||Writer, Impress|| Size of area to work should fit itself every time when user add or hide panel (Stylish, Task/Slide panel)
CLU: as i understand you the current impress already behave like that: close task or slide pane -> work area grows, activate them -> work area shrinks .. may you describe it more precise for better understanding .. thx
|Check all words||All||Options > Language Settings > Writing Aids > Options. "Check uppercase words" and "Check words with numbers" are unchecked.||Quest|
|Lower macro security||All||In currently state (high level), OO.o automatically doesn't run any macros. In medium level, OO.o doesn't run macro, but ask user if should it be run.||Quest|
|Information bar on the top instead pop-up||All||It concerns passwords, macros and may be comments. Please, look at DirectManipulationSnippets#Mockups_3||Quest|
|More security user's data||All||Options > Load/Save > General. Always create backup copy is unchecked and Save AutoRecovery take too much time. It shouldn't be 15 min, but 2-3 minutes.||Quest|
|d&d of graphic should copy it||Impress||.. not create a link .. by exporting or replacing the document the link gets 'corrupted' and the graphic seems to be lost (letter from stella)||Clu|