QA/SVT

                                           AOO SVT Report

Contents

[ Introduction 1]

[ Calc 1]

[ SVT Result Summary 1]

[ SVT Result Detail 2]

[ SVT Cases Description 2]

[ Impress 3]

[ SVT Result Summary 3]

[ SVT Result Detail 4]

[ SVT Cases Description 4]

[ Writer 5]

[ SVT Result Summary 5]

[ SVT Result Detail 5]

[ SVT Cases Description 6]

Introduction

This SVT(System Verification Test) report use to report memory change between two builds in specific scenarios. Add report memory leak problem and memory leak improvement.

Platform: Widdows 7 64bit

Build: Run SVT cases on 20120625 build (r1353449) and 20121012build(r1397404) separately.

Cases: 100 iterations, 41 Scenarios, run 24hours.

SourceCode: /test/testgui/source/svt/gui

Calc

SVT Result Summary

• There only one scenario “switchFileContainingChart” have obvious improvement(with green background).
• There is one scenario “insertChartToOpenedSC” have obvious memory leak(with read background).
• Other scenario have little memory leak, and some with upward trend in new build.

SVT Result Detail

Scenario	Memory Total(r1353449)	Memory(Per iteration)	Memory(r1397404)	Memory(Per iteration)	Memory trend between build
saveNewSCWithNumberFormat	75204KB – 84160KB	+89.56KB	80740KB – 90860KB	+101.2	Up
saveNewSCWithPrintRange	79152KB – 87924KB	+87.72KB	84676KB – 94608KB	+99.32	Up
saveNewSCWithText	73124KB – 81164KB	+80.4KB	78660KB – 87808KB	+91.48	Up
saveNewSCWithDataSort	73740KB – 81924KB	+81.84KB	79124KB – 88780KB	+96.56	Up
saveNewSCWithInsertSheets	68536KB – 76236KB	+77KB	75104KB – 84020KB	+89.16	Up
saveNewSCWithStandardFilter	73812KB – 82272KB	+84.6KB	78988KB – 89000KB	+100.12	Up
saveNewSCWithInsertPic	76416KB – 84194KB	+77.78KB	77012KB – 86388KB	+93.76KB	Up
saveNewSCWithValidaty	80180KB – 89096KB	+89.16KB	80264KB – 89796KB	+95.32KB	Up
insertChartToOpenedSC	104792KB – 1129952KB	+10251.6KB	106336KB – 1081332KB	+9749.96KB	Down
insertPicToOpenedSC	87064KB – 94836KB	+77.72KB	87892KB – 94456KB	+65.64KB	Down
insertFontWorkToOpenedSC	88584KB – 97008KB	+84.24KB	88744KB – 96400KB	+76.56KB	Down
switchFileContainingChart	101732KB – 336400KB	+2346.68KB	102360KB – 113808KB	+114.48KB	Down

SVT Cases Description

Scenario Name	Description
saveNewSCWithNumberFormat	Create a new Calc Input number 0.3 to A1 Change number format Save and reopen this Calc file
saveNewSCWithPrintRange	Create a new Calc Select Format->Print Range->Edit in main menu In “Edit Print Ranges” dialog, Print range type Select “- user defined -” ,range select” $A$1:$C$4” Input text to A1 Save and reopen this Calc file
saveNewSCWithText	Create a new Calc Input text to A1 Save and reopen this Calc file
saveNewSCWithDataSort	Create a new Calc file Input some integer number in Column1 Select Data->Sort in main menu Select Options tab in Sort dialog Sort by Column A with Ascending Save and reopen this Calc file
saveNewSCWithInsertSheets	Create a new Calc file Insert new sheet after current sheet with specified sheet name Save and reopen this Calc file
saveNewSCWithStandardFilter	Create a new Calc file Input some integer numbers in Column A Select Cell A1 Select Data->Filter->Standard Filter Set Filter value Save and reopen this Calc file
saveNewSCWithInsertPic	Create a new Calc file Insert a picture from jpg file Save and reopen this Calc file
saveNewSCWithValidaty	Create a new Calc file Insert Data Validity Validity Criteria Allow “Whole Numbers” Validity Data greater than 1 Input validity error alert message Input 1,2,3 in validity cell separately Save and reopen this Calc file
insertChartToOpenedSC	Open plain ods sample file Input data and create a new Chart Close without save
insertPicToOpenedSC	Open plain ods sample file Insert a new sheet Insert a picture from file Close without Save
insertFontWorkToOpenedSC	Open plain ods sample file Insert a Fontwork Close without save
switchFileContainingChart	Open 6 ods files with Chart Switch different window Close all opened files

Impress

SVT Result Summary

These scenarios on Impress have no various Improvement between two build, but they nearly all have >100KB memory growth.

SVT Result Detail

Scenario	Memory Total(r1353449)	Memory(Per iteration)	Memory(r1397404)	Memory(Per iteration)	Memory trend between build
saveNewSDWithNewSlides	79164KB – 90288KB	+111.24KB	78600KB – 90028KB	+114.28KB	No
saveNewSDWithTable	81364KB – 93120KB	+117.56KB	80376KB – 92000KB	+116.24KB	No
saveNewSDWithPic	80004KB – 91504KB	+115KB	78972KB – 90508KB	+115.36KB	No
saveNewSDWithTextbox	80324KB – 91572KB	+112.48KB	78952KB – 90956KB	+120.04KB	No
saveNewSDWithExternalSlides	94196KB – 105872KB	+116.76KB	94248KB – 104836KB	+105.88KB	Down
saveNewSDWithAnimation	84540KB – 97196KB	+126.56KB	84392KB – 96560KB	+121.68KB	No
saveNewSDWithShowSettings	96908KB – 109900KB	+129.92KB	98304KB – 108660KB	+103.56KB	Down
saveSDTemplate	82280KB – 93580KB	+113KB	81612KB – 91924KB	+103.12KB	Down
switchViewOfOpenedSD	84268KB – 93600KB	+93.32KB	86060KB – 93544KB	+74.84KB	Down

SVT Cases Description

Scenario Name	Description
saveNewSDWithNewSlides	Create a new Impress file Insert a new Slide Save and reopen this Impress file
saveNewSDWithTable	Create a new Impress file Insert a table with some number as content Save and reopen this Impress file
saveNewSDWithPic	Create a new Impress file Insert a picture from file Save and reopen this Impress file
saveNewSDWithTextbox	Create a new Impress file Create a new textbox Save and reopen this Impress file
saveNewSDWithExternalSlides	Create a new Impress file Insert slides from external odp file Save and reopen this Impress file
saveNewSDWithAnimation	Create a new Impress file Insert a Callout shape Add Circle Entrance Animation to this Callout shape F5 to Show this slide Exit Slide show Save and reopen this Impress file
saveNewSDWithShowSettings	Create a new Impress file Insert Slide from external file Add Slide transition with slow speed to all slides. F5 to Show these slide. Save and reopen this Impress file
saveSDTemplate	Open a otp file Save to odp and reopen this odp file
switchViewOfOpenedSD	Open a plain odp file Switch view to Outline, Slide Sorter, Notes, Slide Master, Notes Master, Normal Close without Save this Impress file

Writer

SVT Result Summary

There is only one scenario “InsertChartToOpenedSW” may have memory leak. Other scenarios have no various memory growths.

SVT Result Detail

Scenario	Memory Total(r1353449)	Memory(Per iteration)	Memory(r1397404)	Memory(Per iteration)	Memory trend between build
saveNewSWWithPic	72912KB – 80980KB	+80.68KB	73476KB – 83940KB	+104.64KB	Up
saveNewSWWithBullet	78288KB – 85832KB	+75.44KB	77764KB – 87664KB	+99KB	Up
saveNewSWWithUnDoDelete	72956KB – 80168KB	+72.12KB	73412KB – 82840KB	+94.28	Up
saveNewSWWithSpellCheck	77772KB – 85580KB	+78.08KB	77156KB – 86960KB	+98.04KB	Up
saveNewSWWithHeaderFooter	76716KB – 83936KB	+72.2KB	76048KB – 85472KB	+94.24KB	Up
saveNewSWWithFrameAnchor	73928KB – 81292KB	+73.64KB	74964KB – 83900KB	+89.36KB	Up
saveNewSWWithSDAsOLE	90116KB – 99748KB	+96.32KB	91796KB – 98636KB	+68.4KB	Down
saveNewSWWithTOC	86284KB – 94552KB	+82.68KB	86032KB – 96000KB	+99.68KB	Up
splitMergeTableOnOpenedSW	70572KB – 74380KB	+38.08KB	71272KB – 76944KB	+56.72KB	Up
addDelColumnsRowsInTableOnOpenedSW	70800KB – 74612KB	+38.12KB	71372KB – 77160KB	+57.88KB	Up
setParaPropertoesOnOpenedSW	95412KB – 100472KB	+50.6KB	96268KB – 103028KB	+67.6KB	Up
InsertPicToOpenedSW	94900KB – 97444KB	+61KB	95368KB – 100248KB	+116KB	Up
InsertOLEToOpenedSW	103352KB – 113592KB	+102.4KB	104416KB – 115124KB	+107.8KB	No
InsertChartToOpenedSW	111364KB – 1125652KB	+10142.88KB	112628KB – 1088060KB	+9754.32KB	Down
openSWWithXForm	78732KB – 91148KB	+124.16KB	75800KB – 82764KB	+69.64KB	Down
openSWWithSecuritySignature	70676KB – 74340KB	+36.64KB	77504KB – 82784KB	+52.8KB	Up
saveNewSWWithShapeToHTML	68576KB – 80456KB	+118.8KB	69152KB – 82680KB	+135.28KB	Up
saveNewSWWithLineToDoc	73460KB – 90468KB	+170.08	75548KB – 92496KB	+169.48KB	No
saveNewSWWithPicToDoc	72944KB – 81720KB	+87.76KB	73320KB – 84100KB	+107.8KB	Up

SVT Cases Description

Scenario Name	Description
saveNewSWWithPic	Create a new Writer file Insert a picture from file Save and reopen this Writer file
saveNewSWWithBullet	Create a new Writer file Input some paragraphs Set bullet for these paragraphs Undo and Redo Save and reopen this Writer file
saveNewSWWithUnDoDelete	Create a new Writer file Insert a Ellipse Shape Delete this shape Undo and Redo Save and reopen this Writer file
saveNewSWWithSpellCheck	Create a new Writer file Input a word with wrong spell Pop up Spell check Select the first word in Suggest list Click Ignore Once button Save and reopen this Writer file
saveNewSWWithHeaderFooter	Create a new Writer file Insert default header and footer Save and reopen this Writer file
saveNewSWWithFrameAnchor	Create a new Writer file Insert a new Frame Format frame anchor “To Page”, “To Paragraph”, “To Character”, “As character” Save and reopen this Writer file
saveNewSWWithSDAsOLE	Create a new Writer file Insert a odp file as OLE object, and link to file Activate this OLE object and exit Save and reopen this Writer file
saveNewSWWithTOC	Create a new Writer file Input some paragraphs Set some style for them Insert Index and Tables Save and reopen this Writer file
splitMergeTableOnOpenedSW	Open a odt file with table in it Split cells and Merge cell in this table Close without Save this file
addDelColumnsRowsInTableOnOpenedSW	Open a odt file with table in it Insert row to this table Delete row of this table Insert column to this table Delete column of this table Close without save this file
setParaPropertoesOnOpenedSW	Open a odt sample file Pop up paragraph dialog Set Vertical paragraph alignment with “Bottom” Close without save this file
InsertPicToOpenedSW	Open a plain odt sample file Insert a picture from file Close without save
InsertOLEToOpenedSW	Open a plain odt file Insert a default OLE object Close without save
InsertChartToOpenedSW	Open a plain odt file Insert a default OLE object Close without save
openSWWithXForm	Open a sample file with XForm Close this file
openSWWithSecuritySignature	Open a sample file with security signature Close this file
saveNewSWWithShapeToHTML	Create a new Writer file Insert a shape Save to html file then close
saveNewSWWithLineToDoc	Create a new Writer file Insert 10 lines Save to doc file then close
saveNewSWWithPicToDoc	Create a new Writer file Insert a picture from file Save to doc file then close