Documents Texte avec 3.x Writer

From Apache OpenOffice Wiki
< FR‎ | Documentation‎ | Writer Guide
Revision as of 09:35, 12 April 2009 by Sgauti (Talk | contribs)

Jump to: navigation, search

Les paramètres choisis sur les pages de la section Writer dans la boite de dialogue Options déterminent comment les documents Writer apparaîtront et se comporteront lorsque vous travaillez dessus.

Si la boîte de dialogue Options n'est pas déjà ouverte, cliquez sur Outils > Options.

Cliquez sur le signe + en face de Writer dans la section de gauche de la boîte de dialogue Options - Une liste de sous-sections s'affiche.

Options Writer

Options générales

Choisissez Writer > Général dans la boîte de dialogue d'options pour afficher la page montrée ci-dessous.

Choisir les options générales de Writer

Les choix effectués sur cette page affectent l'actualisation des liens et des champs, l'unité pour les règles et autres mesures et la position par défaut des tabulations.

Actualiser les liens lors du chargement

En fonction de votre façon de travailler, vous pouvez ne pas souhaiter que les liens soient actualisés lors du chargement du document. Par exemple, si vos fichiers sont liés à d'autres sur un réseau, vous n'actualiserez pas les liens lorsque vous êtes connecté au réseau.

Actualiser les champs et les diagrammes automatiquement

Vous pouvez ne pas souhaiter que les champs et les diagrammes s'actualisent automatiquement lorsque vous travaillez car cela pourrait ralentir les performances.

Paramètres – Espace entre les tabulations

Le paramètre Espace entre les tabulations spécifie la distance que réalise le curseur à chaque pression sur la touche Tab. CE paramètre est également utilisé pour la distance de retrait appliquée par les boutons Augmenter le retrait et Diminuer le retrait dans la barre d'outils de formatage, ce qui affecte le retrait de tout le paragraphe.

View options

Two pages of options set the defaults for viewing Writer documents: View (described here) and Formatting Aids (described in the next section).

If the items on the Writer - View page are not self-explanatory, you can easily test their effects in a blank document.

This is a good page to check if, for example, you cannot see graphics on the screen or you see field codes instead of the text or numbers you are expecting.

Choosing View options for Writer

Formatting Aids options

The display of symbols such as paragraph ends and tabs help you when writing, editing, and doing page layout. For example, you might want to know if any blank paragraphs or tabs are included or if any tables or graphics are too wide and intrude into the margins of the page.

On the Writer – Formatting Aids page, select the required options.

Choosing Formatting Aids options


Grid options

Specifying “snap to grid” can be very helpful when you are trying to align several objects such as graphics or tables. If the grid intervals (subdivisions) are too large, you may find that you do not have enough control in placing the objects.

On the Writer – Grid page, you can choose whether to enable this feature and what grid intervals to use.

Choosing Grid options

Default fonts

The default fonts specified on the Writer – Basic Fonts (Western) page apply to both Writer documents and HTML (Web) documents.

  • If you want to change the defaults, do so on the Writer – Basic Fonts (Western) page. You can, of course, choose other fonts for use in specific documents, either by applying direct formatting or by defining and applying styles in those documents.
  • When choosing fonts on this page you are not limited to single fonts or to the ones shown in the drop-down list. You can specify a “font family”as a comma‑separated set of fonts that includes those suitable for Windows, Macintosh, Linux, and other operating systems. These choices are particularly important in HTML documents.
  • If the document is viewed on a system that does not have the first font specified, it will use one of the other fonts if that one is available. Otherwise, it will substitute a font that is available on the system.
  • Type the list of fonts, separated by commas, in the boxes. If you want these defaults to apply to the current document only, select that option. The Default button resets the values on this page to the defaults installed with
Choosing default fonts

Print options

On the Writer – Print page, you can choose which items are printed with the document by default. These options are in addition to those on the – Print page.

Some considerations:

  • When you are working on drafts and you want to save printer ink or toner, you might want to deselect some of the items in the Contents section.
  • The Print black selection causes color text (but not graphics) to print as black on a color printer; on a black-and-white printer, this option causes color text to print as solid black instead of shades of grey (dithered).
  • Contrast Print black with Convert colors to greyscale on the Options – – Print page (Figure 6), which prints all graphics as greyscale on color printers. (On black-and-white printers, color in graphics normally prints as greyscale.)
  • If you are printing double-sided on a non-duplexing printer, you might choose to print only left or right pages, then turn the stack over and print the other pages.
  • Depending on how your printer ejects pages (face up or face down), you might need to print the pages in reverse order so they stack in the correct order as they are printed.


Choosing Print options for Writer

Default table options

On the Writer – Table page, you can specify the default table behavior.

Choosing default Table options

Some considerations:

  • If most of your tables will require borders or headings, select those options. If most of your tables are used for page layout, deselect borders and headings.
  • Number recognition can be very useful if most of your tables contain numerical data; Writer will recognize dates or currency, for example, and format the numbers appropriately. However, if you want the numbers to remain as ordinary text, this feature can be quite irritating, so you will want to deselect it.
  • The Keyboard handling section specifies the distances that cells move when you use keyboard shortcuts to move them and the size of rows and columns inserted using keyboard shortcuts.
  • The choices in the Behavior of rows/columns section determine the effects that changes to rows or columns have on adjacent rows or columns and the entire table. You might need to test these selections to fully understand the effects.

Change tracking options

If you plan to use the change-tracking feature of Writer, use the Writer – Changes page to choose the way inserted and deleted material is marked, whether and how attribute changes are marked, and whether and how change bars are marked in the margins.

Choosing options for tracking changes

Compatibility options

Do you need to import Microsoft Word documents into OOo Writer? If so, you might want to select some or all of the settings on the Writer – Compatibility page. If you are not sure about the effects of these settings, leave them as the defaults provided by OOo. For information about the settings not described below, see the Help.

Choosing compatibility options

Use printer metrics for document formatting

If this option is selected, the printer specified for the document determines how the document is formatted for viewing on screen. The line breaks and paragraph breaks you see on screen match those that apply when the document is printed on that printer.

This setting can be useful when several people are reviewing a document that will eventually be printed on a specific printer or when the document is exported to PDF (a process that uses “Adobe PDF” as the printer).

If this option is not selected, a printer-independent layout will be used for screen display and printing.

Add spacing between paragraphs and tables (in current document)

In Writer, paragraph spacing is defined differently than it is in MS Word documents. If you have defined spacing between two paragraphs or tables, spacing is also added in the corresponding MS Word documents.

If this option is selected, MS Word-compatible spacing is added between paragraphs and tables in Writer documents.

Add paragraph and table spacing at tops of pages (in current document)

You can define paragraphs to have space appear before (above) them. If this option is selected, any space above a paragraph will also appear if the paragraph is at the beginning of a page or column, if the paragraph is positioned on the first page of the document, or after a manual page break.

If you import an MS Word document, the spaces are automatically added during the conversion.

Add paragraph and table spacing at bottom of table cells

Specifies that the bottom spacing is added to a paragraph, even when it is the last paragraph in a table cell.

Use as Default

Click this button to use the current settings on this page as the default in

AutoCaption options

Do you want OOo to automatically insert captions for tables, pictures, frames, and OLE objects that have been inserted in a Writer document?


If you do want automatic captions on one or more object types:

  1. Choose Writer > AutoCaption on the Options dialog box.
  2. On the Writer – AutoCaption page, select the check box next to an object you want to be automatically captioned (Picture in the example shown).
  3. With the item highlighted, specify the characteristics of the caption. The supplied categories for captions are Drawing, Illustration, Table, and Text. However, you are not limited to the supplied categories. If you want to use another name (for example, Figure) for the caption label, type the required term in the box. In the example shown, I have added the category “Figure” to the list.

Additional information about numbering captions by chapter, character styles, frame styles, and other items on the AutoCaption page, is given in later chapters in the Writer Guide.

Setting up a new category for automatic captions on graphics

Mail Merge E-mail options

You can produce form letters using Writer and then use the mail merge function to personalize those letters and send them to a number of addresses taken from a data source, such as an address book. Mail merged documents can be printed and mailed, or sent by e-mail.

Use the Options – Writer – Mail Merge E-mail page to set up the user and server information for sending form letters by e-mail. If you are not sure what information to put in any of the fields, consult your e-mail program or your Internet service provider.

Specifying settings for use when e-mailing mail-merged form letters

Choosing options for HTML documents

You can configure to treat HTML documents in Writer differently than regular documents.

  1. If the Options dialog box is not already open, click Tools > Options.
  2. Click the + sign by Writer/Web in the left-hand section of the Options – dialog box. A list of subsections drops down.

Here you can customize settings related to printing, formatting aids, view options, table defaults, the grid, and a default background for HTML documents you're working with in Writer.


Content on this page is licensed under the Creative Common Attribution 3.0 license (CC-BY).
Personal tools